Skip to content
Buy Now for Free Shipping! | Contact Us: 864-408-8223
Buy Now for Free Shipping! | Contact Us: 864-408-8223

AlorAir PuriCare 500IG Air Filtration System/Dust Collector

by AlorAir
Original price $249.00 - Original price $249.00
Original price
$249.00 - $249.00
Current price $249.00
in stock, ready to be shipped

✓ Shop at My Cleaning Direct
✓ Manufacturer Warranty Included
✓ Free USA Shipping
✓ Questions? - Call 864-408-8223

Why Buy from My Cleaning Direct?

  • Authorized Dealer
  • Price Match & No Sales Tax (Except FL)
  • Free USA Shipping
  • Any Questions? Live Chat Us or Call us at 864-408-8223

PuriCare 500IG Air Filtration System Compared to PuriCare 500, its unique double ionization technology produces equal amounts of positive and negative ions. Particles in the air are charged by ions, which cause the particles to aggregate and be captured by the filter. And the trace amounts of ozone produced during operation can neutralize harmful pollutants and odors. Even in a 500 sq. ft. carpenter's shop/DIY house, the device also works great.

The unit comes equipped with a powerful 1/8 horsepower motor that can operate at one of three speeds (i.e.350, 450, or 500 CFM) depending on the situation. It is easy to switch between them. Additionally, the system can efficiently handle particle dust, sawdust, and pet sawdust, among others, above 0.001mm. The lightweight design weighs only 25.5 pounds and can be combined with the cleverly designed buckle structure and eye bolts on both sides. It is easy to move and install and can meet your unique, complex needs. PuriCare 500IG enables you to breathe cleaner, safer air with confidence. Of course, it's not just that!


  • cETL Certified: Certified for compliance with safety and performance standards.

  • Sheet Metal Spray Shell: Strong corrosion and wear resistance for durability in harsh environments.

  • Powerful 1/8HP Motor:

    • Special overload protection.
    • Strong airflow to prevent potential fires and explosion hazards.
  • Sturdy Fan Blades:

    • Reduce noise.
    • Increase airflow.
  • Low Noise Level: Below 61dBA, equivalent to a quiet office, meeting U.S. Department of Health and Human Services standards.

  • Two Control Modes:

    • Three-speed control.
    • PM 2.5 Setting.
  • Three Speeds: 350, 450, or 500 CFM per minute.

  • Filters:

    • One-micron inner filter.
    • Five-micron pre-filter.
    • Easy to clean and replace.
  • Built-in Ion Generator: Enhances air purification.

  • RF Remote Control:

    • Built-in timer (e.g., 1/2/3/4/5/6 hours).
    • Works up to 26 feet.
  • Color Bar Indicator: Shows surrounding air quality.

  • Working Time Timer: Allows checking the equipment's working time.

  • Buckle Handles on Both Sides: Facilitate easy movement and installation.

  • Two Top-Fixing Structures:

    1. Four eyebolts suspended from the ceiling.
    2. Screw the machine to the wall with four M4 screws.
  • Rubber Feet: Prevent marking surfaces.

  • Automatic Operation Function:

    • Continuous operation at the highest wind speed by default (e.g., red/yellow/green).


    Adding a negative ion device to a woodworking dust collector is a concept not usually found in woodworking shops. The idea behind using negative ions (also called "anions") is to clean and freshen the air, and they are more commonly associated with air purifiers. The installation of such a device in a dust extraction system for woodworking offers the following advantages:

    Improved dust collection - some advocates believe that negative ions increase the likelihood that particles in the air will clump or cluster together. If this is the case, larger clumped particles can be more easily captured by the dust collector.

    Neutralize positive ions - Friction from electronic equipment, certain types of lighting, and even woodworking tools can create positive ions. The influx of negative ions can help balance the number of ions in the air, which some believe has an impact on health.

    Reduce odours - Negative ions can neutralize odors and reduce levels of harmful chemicals in the air. In wood workshops, especially when certain paints, adhesives or types of wood are used, there can sometimes be strong odours

    Possible reduction of microbes - Some studies show that negative ions can reduce bacteria and viruses in the air. Although wood workshops are generally not a high risk for these pathogens, any additional reduction can be beneficial, especially in a closed environment.

    Maintain Lung Health -Inhaling wood dust has been linked to many diseases, such as dermatitis, asthma, various allergies, and cancer. However, simply having a dust collector in your workshop will not provide sufficient protection against this dire consequence. Air filtration systems designed for woodworking workshops can purify the air by capturing particles as small as 0.001 mm. Dust collectors cannot capture particles of this size. Thus, without using an air filter, you risk exposing yourself to life-threatening wood chips that are too minuscule to be caught by other purification systems.

    Improve Your Mood - Dual-ion technology charges air particles with extra electrons, dispersing negative ions for deep cleaning. It also minimizes dust, dander, pollen and other allergens and pollutants. It will bring you a pleasant experience.

    Clean Your Workshop Even When You Are Away - It makes sense to keep the PuriCare 1100IG running after you've left the workshop, but the last thing you want is to leave the unit running all day without needlessly draining power while you're away. With the auto-off feature, you can choose between one and six-hour timers with the included RF remote to clean the air. Thereafter, the system will shut down independently. Avoid having out-of-control electricity bills.

    Easy Installation, Simple Operation, and Low Maintenance Cost - The PuriCare 1100IG Filtration System is pre-assembled, so you solely need to determine where to place the unit. Be sure to check out our instruction manual. It's easy to operate and doesn't take much time to learn. When it comes to maintenance, the system doesn't require much attention other than occasional filter changes and weekly cleaning.


    • Motor: 1/8 HP, 115 V/60 Hz, 1.0 A
    • Air Flow: Three adjustable settings - 350, 450, and 500 CFM
    • Ideal For: Designed for spaces up to 500 sq. ft.
    • Noise: <61 dBA (decibels), ensuring relatively quiet operation
    • Outer Filter: 5 microns, providing effective filtration for larger particles
    • Inner Filter: 1 micron, offering finer filtration for smaller particles
    • RF Remote Control: Convenient wireless control for ease of use
    • Installation Hooks: Support for different installation methods
    • Setting Timer: Allows users to set a timer for automated operation
    • Cord: 5 ft, providing a standard power cord length
    • Unit Dimensions (L×W×H): 20.1 x 17 x 11 inches
    • Unit Weight: 25.5 lbs, making it relatively portable
    • Shipping Dimensions (L×W×H): 22.9 x 19.8 x 12.4 inches
    • Shipping Weight: 30.2 lbs, including packaging
    • Loading Quantity: 20': 308 Sets; 40': 644 Sets; 40'HQ: 736 Sets


                Specifications Sheet
                User Guide
                Parts List
                Data Plate
                Wire Diagram